Hitachi AMS 2000 Reference Manual page 172

Sense Detailed
code code
9576 007C
9576 007D
9576 007E
9576 007F
9576 0080
9576 0081
9576 0082
9576 905E
9576 905F
9576 x005
9576 x006
9576 x007
9576 x008
9576 x009
9576 x00B
9576 x00C
9576 x00D
3–16
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 Management information of
Dynamic Provisioning is being
updated.
84 The operation cannot be
performed due to insufficient
capacity of the DP pool for the
specified P-VOL.
84 The operation cannot be
performed due to insufficient
capacity of the DP pool for the
specified S-VOL.
84 The memory reconfiguration
process is in progress.
84 The memory reconfiguration
process is in progress.
84 The status of the specified S-VOL
is SMPL, COPY, or PAIR.
84 There are no pairs in the specified
group whose status is SSWS.
94 There is a SnapShot pair, which
has an MU number specified for a
SnapShot P-VOL, has not been
placed in the PAIR or PSUS status,
and whose S-VOL is one of the S-
VOLs with the specified CTG
numbers. Otherwise, the process
of reconfigure memory is in
progress on the remote array.
94 There is no pair, which is in the
PAIR status, in the target CTG.
94 The LU of the remote array is
being formatted.
94 The remote array is undergoing
the pseudo deliberate shutdown.
94 The remote array has undergone
the pseudo deliberate shutdown.
94 The S-VOL is undefined.
94 The WWN of the remote array is
illegal.
94 The remote array is undergoing
hot replacement of the firmware.
94 A command error occurred.
94 The optional feature of TrueCopy
of the remote array is invalid.
Maintenance log and tracing functions
Recommended Action
Retry after waiting for a
while.
Check the capacity of the DP
pool.
Check the capacity of the DP
pool.
Retry after the memory
reconfiguration process
completes.
Retry after the memory
reconfiguration process
completes.
Check the pair status.
Check the pair status.
Check the pair status of the
SnapShot. Otherwise, retry
after the process of
reconfigure memory is
completed.
Check the pair status of the
LU.
Retry after waiting for a
while.
Retry after the pseudo
deliberate shutdown is
completed.
Retry after waiting for a
while.
Check the status of the LU.
Check the array WWN.
Retry after waiting for a
while.
Retry after waiting for a
while.
Unlock and validate the
optional feature.