Sense Code And Detail Code - Hitachi AMS 2000 Reference Manual

Sense code and detail code

Table 3-5
detailed codes.
•
Sense Detailed
code code
2602
2602
2602
2602
2602
2602
2602
2602
2602
2602
3180
9501
9510
9531
9536
9552
9557
956B
9576 0000
9576 0001
9576 0002
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
shows sense codes and detailed codes. 0~A will be set in the x of
Table 3-5: Sense Codes
Sub
Error contents
code
The primary sequence number is
beyond the limits of supported.
The secondary sequence number
is beyond the limits of supported.
The LUN of the P-VOL is beyond
the limits of supported.
The LUN of the S-VOL is beyond
the limits of supported.
The primary port number is
beyond the limits of supported.
The secondary port number is
beyond the limits of supported.
The object LU is beyond the limits
of supported.
The object LU is undefined.
The environment has a problem.
The retention term is beyond the
limits of validity.
The object LU is unformatted.
A command was received during
execution of the pseudo deliberate
shutdown.
A command was received during a
performance of hot replacement of
the firmware.
The password protection is being
logged in.
The optional feature is invalid.
The object LU is defined as a
command device.
LU capacities of the P-VOL and S-
VOL are not the same.
The capacity is beyond the limits
of supported.
84 The pair status of the P-VOL is
other than SMPL.
84 The status of the P-VOL is other
than normal or regressive.
84 The P-VOL is a Cache Residency
LU.
Maintenance log and tracing functions
Recommended Action
Check the serial number.
Check the serial number.
Check the specified LUN.
Check the specified LUN.
Check the specified port
number.
Check the specified port
number.
Check the status of the LU.
Check the status of the LU.
Check the environment of
CCI.
Check that the specified
value that has been set is 0 to
21900.
Check the status of the LU.
Retry after the pseudo
deliberate shutdown is
completed.
Retry after waiting for a
while.
Retry after waiting for a
while.
Install the optional feature.
Check the attribute of the LU.
Check the capacity of the LU.
Split the unnecessary pairs.
Check the pair status of the
LU.
Check the status of the LU.
Check the status of the LU.
3–9