•
LUN: Logical unit number of the volume. Displayed only for Linux
systems.
NOTE:
firmware level.
C:\HORCM\etc>echo hd01 hd03 | inqraid –find
Group
PairVol(L/R) (Port#,TID,LU-M) ,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
horcl
dev00(L)
(CL2-A , 0,
->Harddisk1
Group
PairVol(L/R) (Port#,TID,LU-M), Seq#,LDEV#, P/S, Status, Seq#, P-LDEV#
horcl
dev10(L)
(CL2-A , 2,
->Harddisk3
Figure 1-72: Inqraid Command -find Option (Windows)
C:\HORCM\etc>echo hd01 hd03 | inqraid –findc
DEVICE_FILE
M Group
Harddisk1
0 horcl
Harddisk1[1] -> No such on the group
Harddisk1[2] -> No such on the group
DEVICE_FILE
M Group
Harddisk3
0 horcl
Harddisk3[1] -> No such on the group
Harddisk3[2] -> No such on the group
C:\HORCM\etc>echo hd01 hd03 | inqraid –findc –CLI
DEVICE_FILE
M Group
Harddisk1
0 horcl
Harddisk3
0 horcl
Figure 1-73: Inqraid Command -findc Option (Windows)
The output of the inqraid command with –find (and –findc) includes:
•
DEVICE_FILE: Shows only the device file name.
•
M: Shows the MU#.
•
Group: Shows the group name (dev_group) described in the
configuration definition file.
•
PairVol: Shows the paired volume name (dev_name) of the group
described in the configuration definition file.
•
P/S: Shows the volume attribute (P-VOL, S-VOL, SMPL).
•
Stat: Shows the status of the paired volume.
•
R_DEVICE: Shows the device file name of the remote site.
•
LK: Shows the configuration check result for the paired volume
connection path (physical link of the paired volumes between the
hosts).
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
The display of HOMRCF, Group, and SSID depends on the array
0-0)85006145
3-0)85006145
PairVol
P/S
dev00
S-VOL SSUS
PairVol
P/S
dev10
S-VOL SSUS
PairVol
P/S
dev00
S-VOL SSUS
dev10
S-VOL SSUS
Performing CCI Operations
0.S-VOL
SSUS, -----
3.S-VOL
SSUS, -----
Stat
R_DEVICE
M
Harddisk2
0
Stat
R_DEVICE
M
Harddisk4
0
Stat
R_DEVICE
M
Harddisk2
0
Harddisk4
0
9
-
M
6
-
P/S
Stat
LK
P-VOL PSUS
OK
P/S
Stat
LK
P-VOL PSUS
OK
P/S
Stat
LK
P-VOL PSUS
OK
P-VOL PSUS
OK
1–89