Hitachi AMS 2000 Reference Manual page 195

Sense Detailed
code code
9609 x0A7
9609 x0A8
9609 x0A9
9609 x0AA
9609 x0AB
9609 x0B4
9609 x0B5
9609 x0B6
9609 x0B7
9609 x0B8
9609 x0B9
9609 x0BA
9609 x0BB
9609 x0BC
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
94 The TCE pair status of the S-VOL in
the remote array is PSUS (no
reading or writing allowed).
94 The TCE pair status of the S-VOL in
the remote array is SSWS
(including SSWS(R)).
94 The TCE pair status of the S-VOL in
the remote array is SMPL.
94 The TCE pair status of the S-VOL in
the remote array is PSUS.
94 The TCE pair status of the S-VOL in
the remote array is not SMPL.
94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, the special processing
cannot be continued.
94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, an ownership of LU change
for it has been started.
94 The S-VOL in the remote array
does not exist on the default
owner controller and it has started
an ownership of LU change.
94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, an ownership of LU to be
changed is blocked.
94 The S-VOL in the remote array
cannot change an ownership of LU
and, at the same time, it is using
the sequential buffer.
94 The S-VOL in the remote array
cannot change an ownership of LU
temporarily.
94 The S-VOL in the remote array
cannot change an ownership of LU
and, at the same time, it has
pinned data.
94 The S-VOL in the remote array
cannot change an ownership of LU
temporarily.
94 The S-VOL in the remote array
cannot change an ownership of LU
temporarily.
Maintenance log and tracing functions
Recommended Action
Check the TCE pair status of
the remote array.
Check the TCE pair status of
the remote array.
Check the TCE pair status of
the remote array.
Check the TCE pair status of
the remote array.
Check the TCE pair status of
the remote array.
Check the status of the
remote array and retry after
waiting for a while.
Check the status of the
remote array and retry after
waiting for a while.
Check the status of the
remote array and retry after
waiting for a while.
Check the status of the
remote array and retry after
waiting for a while.
Check the status of the
remote array and retry after
waiting for a while.
Retry after waiting for a
while.
Contact the service
personnel.
Retry after waiting for a
while.
Retry after waiting for a
while.
3–39