Convention for storage capacity values
Physical storage capacity values (for example, disk drive capacity) are
calculated based on the following values:
1 KB
1 MB
1 GB
1 TB
1 PB
1 EB
Logical storage capacity values (for example, logical device capacity) are
calculated based on the following values:
1 block
1 KB
1 MB
1 GB
1 TB
1 PB
1 EB
Related documents
The AMS 2000 Family user documentation is available on the Hitachi Data
Systems Portal: https://portal.hds.com. Please check this site for the most
current documentation, including important updates that may have been
made after the release of the product.
This documentation set consists of the following documents.
Release notes
•
Adaptable Modular Storage System Release Notes
•
Storage Navigator Modular 2 Release Notes
Please read the release notes before installing or using this product. They
may contain requirements and restrictions not fully described in this
document, along with updates and corrections to this document.
Installation and getting started
The following documents provide instructions for installing an AMS 2000
Family storage system. They include rack information, safety information,
site-preparation instructions, getting-started guides for experienced users,
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Physical capacity unit
Logical capacity unit
Preface
Value
1,000 bytes
2
1,000 KB or 1,000
bytes
3
1,000 MB or 1,000
bytes
4
1,000 GB or 1,000
bytes
5
1,000 TB or 1,000
bytes
6
1,000 PB or 1,000
bytes
Value
512 bytes
10
1,024 (2
) bytes
2
1,024 KB or 1024
bytes
3
1,024 MB or 1024
bytes
4
1,024 GB or 1024
bytes
5
1,024 TB or 1024
bytes
6
1,024 PB or 1024
bytes
xiii