Hitachi AMS 2000 Reference Manual page 180

Sense Detailed
code code
9608 0000
9608 0001
9608 0002
9608 0003
9608 0004
9608 0004
9608 0005
9608 0005
9608 0006
9608 0007
9608 0008
9608 0009
9608 000A
9608 000B
9608 000D
9608 000E
9608 0010
9608 0011
9608 0012
9608 0014
3–24
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 In the operation to change an
ownership of LU, an LU having
pinned data was specified.
84 The controller that controls the LU
cannot be changed temporarily.
84 The operation to change an
ownership of LU is in progress.
84 There is no partition to which the
current partition is to be changed.
84 The specified P-VOL or the
specified S-VOL is the LU, for
which a change of the cache
partitions had been reserved.
84 The P-VOL is in a status other than
normal and regressive.
84 The operation to change an
ownership of LU is in progress.
84 The data pool LU being used is in a
status other than normal and
regressive.
84 The pair status of the P-VOL is
other than SMPL, or a V-VOL does
not exist.
84 The pair status is other than SMPL. Check the pair status of the
84 The specified P-VOL is a V-VOL.
84 The specified V-VOL is a P-VOL.
84 The specified LUN is not the same
as the expected one.
84 The group ID is out of appropriate
ranges.
84 The same MU number was
specified within the same P-VOL.
84 The process is in progress.
84 The pair status is other than PSUS. Check the pair status of the
84 The object LUN is not the same as
the expected one.
84 The pairsplit -E command
(instruction of forced suspension)
was received.
84 The P-VOL is in a status other than
normal or regressive.
Maintenance log and tracing functions
Recommended Action
Retry after eliminating
pinned data.
Retry after waiting awhile.
Retry after waiting for a
while.
Retry after waiting for a
while.
Retry after releasing the
reserved status.
Check the status of the LU.
Retry after waiting for a
while.
Check the status of the LU.
Check the pair status of the
LU.
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Make sure of the specified
LU.
Make sure of the specified
group ID number.
Make sure of the specified MU
number.
Retry after waiting for a
while.
LU.
Check the specified LU.
Make sure of the command.
Check the status of the LU.