Hitachi AMS 2000 Reference Manual page 210

Sense Detailed
code code
961C 00D0
961C 00D1
961C 00D2
961C 00D3
961C 00D4
961C 00D5
961C 00D6
961C 00D7
961C 00D9
961C 00DA
961C 00DB
961C 00DC
961C 00DD
961C 00DE
9622 0001
9622 0002
9622 0003
3–54
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Table 3-5: Sense Codes (Continued)
Sub
Error contents
code
84 Three or more volumes of PAIR/
COPY/PAIR(IS)/PSUS(SP) cannot
exist under the specified P-VOL.
84 One or more volumes of RCPY are
under the specified P-VOL.
84 Three or more volumes of PAIR/
COPY/PAIR(IS)/PSUS(SP) cannot
exist under the specified P-VOL.
84 Two or more volumes of PSUS(SP)
cannot exist under the specified P-
VOL.
84 Two or more volumes of PSUS(SP)
cannot exist under the specified P-
VOL.
84 Two or more volumes of PSUS(SP)
cannot exist under the specified P-
VOL.
84 Two or more volumes of PSUS(SP)
cannot exist under the specified P-
VOL.
84 The full capacity mode differs
between the P-VOL and S-VOL.
84 The status of the SnapShot pair
cascading with the specified
ShadowImage pair is invalid.
84 The status of a SnapShot pair
cascading with the specified
ShadowImage pair is PSUE where
the SnapShot pair cannot accept
Read/Write instructions.
84 The specified LU is a V-VOL.
84 The specified S-VOL is the P-VOL
of a SnapShot pair.
84 The specified P-VOL already has
the maximum number of S-VOLs.
84 Any pair operations cannot be
performed due to the status of the
TrueCopy pair cascading with the
S-VOL of the SnapShot pair that
shared P-VOL of the specified
ShadowImage pair.
84 The specified P-VOL is normal or
other than regressed.
84 The specified P-VOL has been set
to the current Cache Residency
LU.
84 The specified P-VOL has been set
to the reserved Cache Residency
LU.
Maintenance log and tracing functions
Recommended Action
Check the pair status of the
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Check the pair status of the
LU.
Set both P-VOL and S-VOL
the same value.
Check the status of the
SnapShot pair.
Check the pair status.
Check the LU.
Check the pair status.
Check the number of S-VOL
paired with the P-VOL.
Check the TrueCopy pair
status.
Check the status of the LU.
Check the attribute of the LU.
Check the attribute of the LU.