YASKAWA Z1000 Technical Manual page 71

Type Signal Name
DO-1
DO-2
Digital Outputs
DO-3
120 Vac
DO-4
DO-5
DO-6
DO-7
Digital Outputs DO-8
DO-9
DO-10
Table 3.8 lists the available control circuit input terminals on the drive. Text in parenthesis indicates the default setting for
each multi-function input.
The drive control circuit terminals on Terminal Board A1 are arranged as shown in
Type No.
+V Power supply for analog inputs
Multi-function analog input 1
A1
(Frequency reference bias)
Frequency
Reference
Multi-function analog input 2
Inputs
A2
(Frequency reference bias)
AC Frequency reference common
FE Ground for shielded lines and option cards
External Power
+P External Power Supply
Supply
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
Description
Digital Output 1
Digital Output 2
Digital Output 3
Digital Output 4
Digital Output 5
Digital Output 6
Digital Output 7
Digital Output 8
Digital Output 9
Digital Output 10
Figure 3.20 Control Circuit Terminal Board A1 Arrangement
Table 3.8 Drive Control Circuit Terminal Board A1
Terminal Name (Function)
(Factory use only) 120 Vac, 66 VA sealed, 1650 inrush
Relay, dry contact form C, 30 Vdc or 120 Vac,
DO-6 (factory use only), 3.7 Amp 360 VA,
DO-7 to DO-10 for customer use, 2 Amp
Figure
+V AC A1 A2 FM AM AC
TB3
Function (Signal Level) Default Setting
10.5 Vdc (maximum allowable current 20 mA)
• 0 to 10 Vdc/100% (input impedance: 20 kΩ)
• 4 to 20 mA/100%, 0 to 20 mA/100% (input impedance: 250 Ω)
• Voltage or current input must be selected by Jumper S1 and H3-01.
• 0 to 10 Vdc/100% (input impedance: 20 kΩ)
• 4 to 20 mA/100%, 0 to 20 mA/100% (input impedance: 250 Ω)
• Voltage or current input must be selected by Jumper S1 and H3-09.
24 V (Max. 150 mA)
3.5 Control Circuit Wiring
Specification
3.20.
0 V
–
3
Page
196
196
160
196
196
162
196
–
–
71