YASKAWA Z1000 Technical Manual page 289

A – Sealing nut
B – Sealing insert
9.
Turn the fan unit over and replace the cooling fan. Install the fan so the air flows upward.
n Installing the Cooling Fan Unit: 4A0124
Note: Do not pinch the fan cable between parts when reassembling the fan unit.
1.
Allow the fan cable to pass through the cable gland body, then pull apart the opening in the sealing insert and fit the
insert around the cable.
A – Clamping claw
B – Sealing insert
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
A
B
Figure 7.31 Remove the Cable Gland: 4A0124
Figure 7.32 Replace the Cooling Fan: 4A0124
A
B
Figure 7.33 Reassemble the Cable Gland: 4A0124
C
C – Clamping claw
C
C – Opening
7.5 Drive Cooling Fans
289
7