Pl 8.17 Tray 2 Assembly (2 Of 2) - Xerox phaser 3635 Service Manual

PL 8.17 Tray 2 Assembly (2 of 2)

Item Part Description
1 130N01274 Tray 2 paper empty sensor (Q07-
210)
2 – Tray 2 paper empty sensor actuator
(P/O PL 8.15 Item 28)
3 – Static eliminator fixing (P/O PL 8.15
Item 28)
4 – Left underside cover (P/O PL 8.15
Item 28)
5 – Right underside cover (P/O PL 8.15
Item 28)
6 – Pickup idler (P/O PL 8.17 Item 31)
7 – Pickup rubber (P/O PL 8.17 Item
31)
8 – Pickup roll shaft (P/O PL 8.15 Item
28)
9 – Static eliminator (P/O PL 8.15 Item
28)
10 – Pickup roll (P/O PL 8.17 Item 31)
11 – Feed roll holder (P/O PL 8.15 Item
28)
12 – Feed roll (P/O PL 8.15 Item 28)
13 – KL-clip (P/O PL 8.15 Item 28)
14 – Bearing (P/O PL 8.15 Item 28)
15 – Pickup roll cam (P/O PL 8.15 Item
28)
16 – Ground strip (P/O PL 8.15 Item 28)
17 – Feed shaft (P/O PL 8.15 Item 28)
18 – Feed gear (P/O PL 8.15 Item 28)
19 – Snap on washer (P/O PL 8.15 Item
28)
20 – Outer pickup gear spring (P/O PL
8.17 Item 30)
21 – Pickup cam spring (P/O PL 8.15
Item 28)
22 – Outer pickup gear (P/O PL 8.17
Item 30)
23 – Inner pickup gear (P/O PL 8.17
Item 30)
24 121N01164 Tray 2 pickup solenoid (SOL08-
820) (REP 7.4)
25 140N63300 Tray 2 PWB
26 – PWB cover (P/O PL 8.15 Item 28)
27 – Pickup cam (P/O PL 8.15 Item 28)
28 – Pick up gear core (P/O PL 8.15
Item 28)
29 152N11752 Tray 2 harness
30 007N01593 Clutch assembly
31 022N02345 Pickup roll assembly (NOTE)
NOTE: HFSI. To reset the HSFI count go to GP 16.
Draft 4
Phaser 3635MFP 5-21
Parts List
PL 8.17