Xerox phaser 3635 Service Manual page 157

Table 1 Paper and media specifications
Paper Type Mode
W x L (mm) W x L (inch) Bypass
Envelope C5 Print 162 x 229
Envelope C6 Print 114 x 162
Custom Print 98 x 148 -
215.9 x 355.6
NOTE: 1. COM-10 envelope weight must not exceed 75 gsm (20lb).
NOTE: 2. Paper weight must be 60 gsm - 120 gsm (16lb - 32lb bond).
NOTE: 3. Long grain paper only.
Table 2 Paper or media weights
Paper or Media Source
Tray 1
Tray 2
Bypass
Duplex
Transparency Specification
Refer to Table 3 for the transparency sizes that can be used in the machine.
Table 3 Transparency specifications
Size Weight
A4 or Letter (see NOTE) 138 - 146 gsm (37 - 39lb)
NOTE: Must be standard Xerox transparencies.
Envelope Specification
Refer to Table 4 for the envelope sizes that can be used in the machine.
Table 4 Envelope specifications
Length Width
162 x 250 mm 98.4 x 176 mm 75 - 90 gsm
(6.3 x 9.8 inches) (3.9 x 6.9 inches) (20 - 24lb)
Draft 4
Phaser 3635MFP
Size Input Source
Trays Duplex
6.38 x 9.02 X X (see
NOTE 2)
N/A X X (see
NOTE 2)
3.86 x 5.83 - X X (see
8.5 x 14 NOTE 2)
Weight
60 - 90 gsm (16 - 24lb bond)
60 - 90 gsm (16 - 24lb bond)
60 - 163 gsm (16 - 40lb bond)
60 - 75gsm (16 - 20lb bond)
Curl Shearing Angle
+/- 5mm +/- 4 degrees
Weight Curl Twist
Less than 2mm Less than 6mm
Label Specification
Refer to Table 5 for the label sizes that can be used in the machine.
Table 5 Label specifications
Size Type
A4 or Letter Paper
6-17
Weight
120 - 150 gsm (32 - 40lb)
General Procedures and Information
GP 9