Lenovo System x3630 M4 Installation And Service Manual page 316

Step 7. If you are instructed to return the backplate, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Replacing the simple-swap hard disk drive backplate
Use this information to replace the simple-swap hard disk drive backplate.
To install the replacement simple-swap hard disk drive backplate, complete the following steps:
Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 36.
Step 2. Align the backplate with the slot on the chassis.
Step 3. Lower the backplate into the server. Leave the backplate an angle of elevation so the backplate
connectors will not get damaged. Make sure the locating plates securely engages the bottom of
the backplate.
Step 4. Press the release latches; then, rotate the top of the backplate toward the front of the server
until it locks into place.
Note: Make sure the backplate is engaged into place by the locating plates and that it is securely
installed in the server.
302
Lenovo System x3630 M4 Installation and Service Guide
1
Release latch
3
2