Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
`
Appareil A Laser de Classe 1
Step 12. Touch the static-protective package that contains the new optical drive to any unpainted
metal surface on the server; then, remove the optical drive from the package and place it on
a static-protective surface.
Step 13. Attach the drive retention clip that you removed from the previous drive to the side of the new drive.
Step 14. Align the drive in the drive bay and slowly slide the drive into the CD/DVD drive bay of the media
cage until the drive clicks into place.
Step 15. Install the CD/DVD cable to the CD/DVD drive (see "Replacing the CD/DVD cable" on page 195
Step 16. Carefully push the media cage back into the server.
Step 17. Tighten the thumbscrew to secure the media cage onto the server.
Media cage
.
Chapter 6
Removing and replacing components
203