Lenovo System x3630 M4 Installation And Service Manual page 940

No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– Lenovo Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 201-824-003 : Standalone Memory Test Aborted
Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run
the test.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– Lenovo Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 201-826-000 : Standalone Memory Test Aborted
BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
Recoverable
No
926
Lenovo System x3630 M4 Installation and Service Guide