Table of Contents
Advertisement
Release latch
Step 5.
If you are instructed to return the drive, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing a simple-swap SATA drive
Use this information to replace a simple-swap SATA drive.
To install a simple-swap hard disk drive, complete the following steps:
Step 1.
Read the safety information that begins in "Safety" on page v, "Handling static-sensitive devices"
on page 38 and "Installation guidelines" on page 36.
Step 2.
Turn off the server and all attached peripheral devices. Disconnect all power cords; then,
disconnect all external cables as necessary to replace the device.
Step 3.
If installing a new drive, touch the static-protective package that contains the new drive to any
unpainted metal surface on the server; then, remove the drive from the package and place it on
a static-protective surface.
Step 4.
Gently push the drive assembly into the drive bay until the drive clicks into place.
Step 5.
Reinstall the filler panel that you removed
Step 6.
Turn on the peripheral devices and the server.
180
Lenovo System x3630 M4 Installation and Service Guide
Handle
Filler panel
Filler panel
Advertisement
Table of Contents
Troubleshooting
