Lenovo System x3630 M4 Installation And Service Manual page 252

Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 36.
Step 2. Make sure that the server and all peripheral devices are turned off and that the power cords and all
external cables are disconnected.
Step 3. Reinstall any adapters and reconnect any internal cables that you removed in other procedures.
Step 4. Align the PCI riser-card assembly with the PCI riser connector on the system board and guide
pins on the server; then, press down on blue touch points on the PCI riser-card assembly to
install the assembly in the server. Make sure that the PCI riser-card assembly is fully seated
in the PCI connectors on the system board.
For 2U riser card assemblies:
2U PCI riser-card assembly 1
(full height, half length,
or low profile adapters)
2U PCI riser-card assembly 2
(1 internal RAID adapter)
Alignment pin
For 1U riser card assemblies:
238
Lenovo System x3630 M4 Installation and Service Guide
Alignment pin