Lenovo System x3630 M4 Installation And Service Manual page 286

Hide thumbs Also See for System x3630 M4:

Table of Contents

7. Install the air baffle (see "Replacing the air baffle" on page 323).

8. Install the PCI riser-card assembly (see "Replacing a PCI riser-card assembly" on page 237).

9. Install the server top cover (see "Replacing the server top cover" on page 321).

10. Reconnect the power cord and any cables that you removed.

11. Turn on the peripheral devices and the server.

To install the front USB connector assembly cable that is on this side of the server, complete the following

1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on page 36.

2. Connect the front USB connector assembly cable to the system board and route the internal cabling as

shown in the following illustration. Remember to insert the cables into the relevant cable clips.

Lenovo System x3630 M4 Installation and Service Guide

Troubleshooting