Port Configuration - HP MSM7xx Management And Configuration Manual

Port configuration

The Port configuration page displays summary information about all ports, VLANs, and
GRE tunnels. Open this page by selecting Controller >> Network > Ports.
Port configuration information
 Status indicator: Operational state of each port, as follows:
 Green: Port is properly configured and ready to send and receive data.
 Red: Port is not properly configured or is disabled.
 Name: Identifier for the port. To configure a port, select its name.
IP address: IP addresses assigned to the port. An address of 0.0.0.0 means that no

address is assigned.
 Mask: Subnet mask for the IP address.
 MAC address: MAC address of the port.
Default port settings
By default, ports are configured as follows:
Port Default IP address
LAN 192.168.1.1
Internet DHCP client
Default DHCP server status
Disabled.
This feature is not available on the Internet port.
Network configuration
Port configuration
3-3