Defining site attributes directly on the controller
Site attributes can be defined directly on the controller eliminating the need to use a RADIUS
server. If needed, both methods can be used at the same time. In this case, the retrieved
attributes are combined with those attributes defined in the Configured attributes list to
build the complete list of attributes that are active on the controller. If the same attribute is
defined on both the RADIUS server and in the Configured attributes list, the setting of
Retrieved attributes override configured attributes determines which definition is
To add a new attribute:
1. Select Add New Attribute. The Public access attribute page opens.
2. Under Name, select an AV-Pair value, as shown in the following figure.
3. Once you select a Name, information appears regarding the correct syntax to specify
under Value. Use the correct syntax to specify the desired Value.
For a complete list of all supported site attributes and their syntax, see
- Site attribute values on page
4. Select Add.
15-33, or consult the online help.
Working with RADIUS attributes
Controller attributes overview