Radio Configuration Parameters - HP MSM7xx Management And Configuration Manual

Hide thumbs Also See for MSM7xx:

Table of Contents

Wireless configuration

Radio configuration

Radio configuration parameters

This section provides definitions for all configuration parameters that are present on all

Regulatory domain

Indicates the geographical region in which the AP is operating. To set the regulatory domain,

Assigning country settings to a group on page

Operating mode

Select the operating mode for the radio. Available options are:

Access point and Local mesh: Standard operating mode provides support for all

wireless functions. (Not supported on radio 3 on the MSM335.)

Access point only: Only provides AP functionality, local mesh links cannot be created.

(Not supported on radio 3 on the MSM335.)

Local mesh only: Only provides local mesh functionality. Wireless client stations cannot

Monitor: Disables AP and local mesh functions. Use this option for continuous scanning

across all channels in all wireless modes. See the results of the scans by selecting

Controlled APS >> Overview > Neighborhood.

Sensor: Enables RF sensor functionality on the radio. HP APs are smart APs, and do not

forward broadcast packets when no client stations are connected. Therefore, the RF

sensor function will not be able to detect these APs unless they have at least one

connected wireless client station. This feature requires that the appropriate license is

installed on the AP. See

The following table shows the operating modes supported for each product.

(Radio 1 + 2)

Licenses on page

Access point

Table of Contents