Quick Install
Installing the Appliance
Terminal Configuration
To connect a console to the unit, configure the PC terminal emulator as a DEC
VT-100 (ANSI) terminal or use a VT-100 terminal, and configure either one to
operate with these settings:
2-10
Power
Fault
Locator
Console
Connect RJ-45 cable to Console port.
•
Use a baud rate of 9600
•
8 data bits, 1 stop bit, no parity, and no flow control
•
For the Windows Terminal program, also disable (uncheck) the "Use
Function, Arrow, and Ctrl Keys for Windows" option
•
For the Hilgraeve HyperTerminal program, select the "Terminal keys"
option for the "Function, arrow, and ctrl keys act as" parameter.