Vlan Support; Gre Tunnels - HP MSM7xx Management And Configuration Manual

For L2 connected APs operating in controlled mode:
Enable the Client data tunnel option under Settings. (If teaming is active, the client

data tunnel is automatically used.)
 Enable the Always tunnel client traffic option on the VSC profile page under Virtual
AP > Client data tunnel.

VLAN support

VLAN configuration is discussed in

GRE tunnels

To view and configure GRE tunnel definitions, select Controller >> Network > Ports.
Initially, no GRE tunnels are defined.
Chapter 7: Working with
Network configuration
VLAN support
VLANs.
3-19