Safety And Emc Regulatory Statements; Safety Information; Informations Concernant La Sécurité - HP MSM7xx Management And Configuration Manual

Safety and EMC regulatory statements

Safety Information

Safety Information

WARNING
Caution
Grounding
These are safety class I products and have protective earthing terminals. There must be an
uninterruptible safety earth ground from the main power source to the product's input wiring
terminals, power cord, or supplied power cord set. Whenever it is likely that the protection
has been impaired, disconnect the power cord until the ground has been restored.
For LAN cable grounding
 If your LAN covers an area served by more than one power distribution system, be sure
their safety grounds are securely interconnected.
 LAN cables may occasionally be subject to hazardous transient voltages (such as
lightning or disturbances in the electrical utilities power grid). Handle exposed metal
components of the network with caution.
Servicing
There are no user-serviceable parts inside these products. Any servicing, adjustment,
maintenance, or repair must be performed only by service-trained personnel.
These products do not have a power switch; they are powered on when the power cord is
plugged in.
Informations concernant la sécurité
WARNING
A-2
Documentation reference symbol. If the product is marked with this
!
symbol, see the product documentation to get more information about the
product.
A WARNING in the manual denotes a hazard that can cause injury or death.
A Caution in the manual denotes a hazard that can damage equipment.
Do not proceed beyond a WARNING or Caution notice until you have
understood the hazardous conditions and have taken appropriate steps.
Symbole de référence à la documentation. Si le produit est marqué de ce
!
symbole, reportez-vous à la documentation du produit afin d'obtenir des
informations plus détaillées.
Dans la documentation, un WARNING indique un danger susceptible
d'entraîner des dommages corporels ou la mort.