To configure the PPPoE client on the Internet port, select Controller >> Network > Ports
and then select DHCP Client and then Configure.
DHCP client ID
Specify an ID to identify the controller to the DHCP server.
Assigned by DHCP server
These settings are assigned to the controller by your service provider DHCP server. The
Internet connection is not active until this occurs.
Identifies the domain the DHCP server is operating in.
Identifies the IP address assigned to the controller by the DHCP server.
Identifies the subnet mask that corresponds to the assigned IP address.
Primary DNS address
Identifies the IP address of the main DNS server the controller will use to resolve DNS
Secondary DNS address
Identifies the IP address of the backup server the controller will use to resolve DNS requests.
Identifies the IP address of the gateway the controller will forward all outbound traffic to.
Indicates how long the address is valid.