Mib Support; Configuring And Activating Sflow - HP MSM7xx Management And Configuration Manual

Note
The controller does not generate any sFlow information of its own. The sFlow

information is only generated by APs.
 The MSM317 only monitors ingress traffic on the Uplink and switch ports.

MIB support

The following MIBs are supported:
 sFlow-MIB base OID: 1.3.6.1.4.1.14706
 SNMP MIB2 System base OID: 1.3.6.1.2.1.1
SNMP MIB2 Interfaces base OID: 1.3.6.1.2.1.2 Note: The ifType OID of the SNMP MIB2

Interfaces will have the value 71 (ieee802.11) for the wireless interfaces.
 SNMP MIB2 IPAddrTable base OID: 1.3.6.1.2.1.4.20
 SNMP MIB2 ifXTable base OID: 1.3.6.1.2.1.31.1.1.1
 SNMP MIB: HP-WLAN-SFLOW-EXTENSIONS-MIB base OID: 1.3.6.1.4.1.11.2.14.11.6.4.2

Configuring and activating sFlow

All sFlow configuration occurs via the controller management tool by selecting Controller
>> Tools > sFlow.
sFlow

Configuring and activating sFlow

18-3