Creating A New Vsc; Assigning A Vsc To A Group - HP MSM7xx Management And Configuration Manual

Working with VSCs

Creating a new VSC

Creating a new VSC

To add a VSC, select Controller > VSCs >>VSC Profiles > Add New VSC Profile.
Define VSC parameters and select Save. Familiarize yourself with sections of interest in
configuration options on page

Assigning a VSC to a group

When working with controlled APs, VSC definitions must be bound to a group so that they
will automatically be activated on the APs in the group. For information on how to bind
(assign) a VSC to a group, see
On the MSM317, VSCs can also be bound to a switch port. See the MSM317 Access Device
Installation and Getting Started Guide.
Note
When working with autonomous APs, the VSC definition you create on the controller must be
manually configured on each autonomous AP. See
page 19-1
5-44
5-5. See the online help for parameter descriptions.
Binding a VSC to a group on page
and the MSM3xx/MSM4xx Management and Configuration Guide.
6-26.
Working with autonomous APs on
VSC