Msm750 Console Port; Using The Console Port - HP MSM7xx Management And Configuration Manual

To connect to a computer, use the supplied null-modem serial cable.

MSM750 Console port

The MSM750 provides an RJ-45 Console (serial) port connector. Connect the supplied RJ-45
to DB-9 (female) adapter. The DB-9 connector (DCE) has pin assignments as follows:
To connect to a computer, use a standard (straight through) serial cable (male-to-female).

Using the console port

The console port can be used to do the following:
 Reset the controller to factory default settings. For complete instructions, see
Console (serial) port on page
 Reset the manager username and password to factory default settings. For complete
instructions, see To reset manager credentials on a controller on page
C-3).
Console ports
Using the console port
Using the
2-6.
B-3