HP MSM7xx Management And Configuration Manual page 71

Addresses
Start / End
Specify the starting and ending IP addresses that define the range of addresses the DHCP
server can assign to client stations. The address assigned to the controller is automatically
excluded from the range.
Gateway
Specify the IP address of the default gateway the controller will assign to DHCP users. In
most cases you will specify the IP address of the controller LAN port as the Gateway.
DNS servers to assign to client stations
Lists the IP addresses of the DNS servers that the controller will assign to users. You can
define DNS options by selecting Network > DNS.
Fixed leases
Use this feature to permanently reserve an IP addresses lease for a specific device. This
ensures that the device is always reachable at the same address on the network, but does not
require a static address to be set directly on the device itself. This table lists all permanently
reserved addresses. Up to 255 fixed leases can be defined.
To assign a specific IP address to a client station specify the following and select Add:
 MAC address: MAC address of the client station in the format: nn:nn:nn:nn:nn:nn.
IP address: IP address that will be assigned to the client station in the format:

nnn.nnn.nnn.nnn.
 Unique identifier: A number that identifies the device. Must be unique to all DHCP
clients on the network. Generally set to the MAC address of the client station. This
parameter is optional unless MAC masquerading is being performed by the client station.
Settings
Domain name
Specify the domain name the controller will return to DHCP users. Typically, this will be your
corporate domain name.
The host name in the currently installed SSL certificate is automatically assigned as the
domain name of the controller. The factory default SSL certificate that is installed on the
controller has the host name wireless.colubris.com.
Network configuration
Address allocation
3-15