HP MSM7xx Management And Configuration Manual page 211

Moving multiple APs between groups
To move one or more APs between groups, do the following:
1. Use the check boxes in the table to select one or more APs. Select the check box in the
table header to select all the APs in the table.
2. Select the group into which to move the APs from the list next to Move selected APs to
group.
3. Select Apply.
Synchronizing APs
Depending on the type of configuration changes that are being synchronized, wireless users
may be forced to reassociate or log in again.
After making configuration changes, you must synchronize the APs with the updated
configuration as follows:
1. In the Network tree, select the group that contains the APs, and then in the right pane,
select Discovered APs. For example, Secondary Group.
APs requiring synchronization are displayed with an orange background and show
Unsynchronized in the Diagnostic column.
Working with controlled APs
Configuring APs
6-29