Password / Confirm password
Password assigned to the AP.
Name used outside the TLS tunnel by all three EAP methods. If this field is blank, then the
value specified for Username is used instead.
Use the Provisioning > Discovery page to provision the method a controlled AP uses to
discover a controller. Two options can be provisioned: DNS discovery or discovery via IP
address. The following page shows Discovery using DNS provisioned.
Enable provisioning here:
Discover using DNS
The AP attempts to connect with a controller using the names in the order that they appear in
To discover the controller on the network, the AP appends each name with the specified
In the above example, the AP will search for controllers with the names:
Working with controlled APs