Boot Rom Functions; Configuration Control Mode; Configuration Control Mode Menu - HP 9000 300 Series Service Handbook

Boot ROM Functions
Configuration Control Mode
Configure Control Mode is run and controlled by your controller's Boot ROM.
You do not need to have an operating system installed to use Configuration
Control Mode. To enter Configuration Control Mode, do the following:
1.
Turn on the monitor and the controller. The power-up messages will appear.
2. As soon as you hear two beeps or the line HP-HIL.Keyboard appears in the
messages, press the
(Space Bar
I
to prevent an operating system from booting.
3. Next, enter©
(Return
I/(
ENTER
I
to enter Configuration Control Mode:
4. You should see this menu appear in the power-up display's upper right-hand
corner:
Configuration Control
Keys Control Class
1 I/0 Configuration
2 Auto System Selection
A Abort without changes
Type [key] RETURN ?
5. You are now in Configuration Control Mode.
Configuration Control Mode Menu
You have three choices on the Configuration Control Menu:
• Press
GJ
and enter Configurable Interface Mode.
• Press
0
and enter OS Selection Mode.
• Press
0
and return to the boot up process
Configurations 3·5