Lldp Settings - HP MSM7xx Management And Configuration Manual

LLDP
Configuring LLDP on an AP
TLV name
Network Policy
Location Identification
Extended Power-via-MDI
MAC/PHY Configuration/
Status
ELIN location
Emergency Call Services ELIN as described, for example, by NENA TID 07-501.
Fast Start timer
After an MED LLDPDU is received, this timer is started and the agent sends one MED
LLDPDU to the MED device each second.

LLDP settings

Transmit interval
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent
to neighboring network devices.
Multiplier
The value of Multiplier is multiplied by the Transmit interval to define Time to live.
Time to live
Indicates the length of time that neighbors will consider LLDP information sent by this agent
to be valid. Time to live is calculated by multiplying Transmit interval by Multiplier.
17-10
Description
The network policy TLV is a fixed length TLV that indicates a
port VLAN type, VLAN identifier (VID), and both the Layer 2
and Layer 3 priorities associated with a specific set of
application types.
Indicates the physical location of the device using the
following form:
 Emergency Call Services ELIN, as described for example
by NENA TID 07-501.
Indicates the IEEE 802.1af (PoE) power related information
on the device which includes:
 Power type
 Power source
 Power priority
 Power value
Indicates the following:
 Bit-rate and duplex capability
 Current duplex and bit-rating
 Whether these settings were the result of auto-
negotiation during link initiation or manual override