Siemens SIMATIC FM 453 Manual page 89

Table 5-9 Menus of "Parameterize FM 453", continued
Menu Title or Entry
(With Single Command)
Channel 2
Channel 3
Traversing program >
Channel1
Channel 2
Channel 3
Open >
Machine data >
Channel 1
Channel 2
Channel 3
Increment >
Channel 1
Channel 2
Channel 3
Tool offset data
Channel 1
Channel 2
Channel 3
Traversing program
Channel 1
Channel 2
Channel 3
Import
Close
Save
Export
Check consistency
Create SDB
Display SDB...
Print
Print preview
Set page
Set printer
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Shortcut
–
–
– Creates a new DB-NC
–
–
–
– Opens the data block stored on the programming device/PC
– Opens the DB-MD stored on the programming device/PC
–
–
–
– Opens the DB-SM stored on the programming device/PC
–
–
–
> – Opens the DB-WK stored on the programming device/PC
–
–
–
> – Opens one of the DB-NC stored on the programming device/PC
–
–
–
Ctrl + O Opens a data block which has been saved as a file
Ctrl + F4 Closes the window of the current DB
Ctrl + S Saves the current data block on the programming device/PC
– Saves the current data block in a file
– Checks the data in the current window for errors
– Reads the FM data blocks which have been generated from this
SDB (system data block), and stores them on the programming de-
vice/PC.
– Displays the SDBs which exist on the programming device/PC; they
can then be deleted.
Ctrl + P Prints all or part of the current data block
– Displays the document in the print preview - no editing possible
– Specifies page layout for printing
– Sets up the printer and sets print options
Defining Parameters of the FM 453
Significance
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
5-27