Table of Contents
Advertisement
Troubleshooting
Table 11-8
General Data Errors, Machine Data Errors, Traversing Program Errors, continued
Cl.
No.
General data errors
4 (04) 124 (7C)
"Save" parameter incorrect
Cause
Effect
Elimina-
tion
4 (04) 125 (7D)
DB memory filed
Cause
Effect
Elimina-
tion
4 (04) 126 (7E)
Allowable program length exceeded
Cause
Effect
Elimina-
tion
4 (04) 127 (7F)
Writing parameters/data is not possible
Cause
Effect
Elimina-
tion
4 (04) 128 (80)
Incorrect module identification
Cause
Effect
Elimina-
tion
4 (04) 129 (81)
Incremental value, incorrect value
Cause
Effect
Elimina-
tion
4 (04) 130 (82)
Tool offset, incorrect value
Cause
Effect
Elimina-
tion
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
11-26
Error Message,
Error Analysis and Elimination
Error response: "Warning" see Table 11-2
Coding not 0 or 1.
DB does not become effective and is stored non-retentively.
Coding not 0 or 1.
The available memory is assigned.
DB does not become effective and is stored non-retentively.
Delete unnecessary programs (DBs) or compress memory by way
of parametering interface.
Number of blocks too high.
DB does not become effective and is stored non-retentively.
Correct program and retransmit.
Axis does not come to a stop.
Parameters/data do not become effective.
Stop axis.
DBs which do not belong to the module were transmitted
(no identification 453).
DB does not become effective and is stored non-retentively.
Transmit the DBs belonging to the FM 453.
9
Value range outside
10
.
Incremental value not effective.
Transmit correct value.
9
Value range outside
10
.
Tool offset not effective.
Transmit correct value.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Message/
Display
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
CBS
or
DB
DB
CBS
or
DB
DB
Advertisement
Table of Contents
