Table of Contents
Advertisement
Connecting Cables
Flexible conductor, cross-sectional area:
Ferrules are not necessary.
You can use ferrules with or without insulated collars to DIN 46228 T.1 or
T.4, Type A in the standard version for front connectors with screw-type or
spring-loaded terminals.
You can connect two lines each measuring 1.0 mm
rules must be used.
Please refer to the manual S7-400/M7-400 Programmable Controller, Hard-
ware and Installation.
Note
To provide optimum immunity to interference, shielded cables should be
used to connect the digital inputs, NL and READY2.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
2
0.5 to 1.5 mm
for front connector with crimp terminals
2
0.25 to 2.5 mm
for front connector with screw-type terminals
2
0.08 to 2.5 mm
for front connector with spring-loaded terminals
Wiring the FM 453
2
. In this case, special fer-
4-29
Advertisement
Table of Contents
