ZiLOG Z80380 User Manual page 38

Z
ILOG
5.3 SELECT REGISTER
The Select Register (SR) controls the register set selection
and the operating modes of the Z380 CPU. The reserved
bits in the SR are for future expansion; they will always read
as zeros and should be written with zeros for future
Reserved (0)
31 30 29
Reserved (0)
15 14 13
5.3.1. IY Bank Select (IYBANK)
This 2-bit field selects the register set to be used for the IY
and IY' registers. This field can be set independently of the
register set selection for the other Z380 CPU registers.
Reset selects Bank 0 for IY and IY'.
5.3.2. IY or IY' Register Select (IY')
This bit controls and reports whether IY or IY' is the
currently active register. IY is selected when this bit is
cleared, and IY' is selected when this bit is set. Reset
clears this bit, selecting IY.
5.3.3. IX Bank Select (IXBANK)
This 2-bit field selects the register set to be used for the IX
and IX' registers. This field can be set independently of the
register set selection for the other Z380 CPU registers.
Reset selects Bank 0 for IX and IX'.
5.3.4. IX or IX' Register Select (IX')
This bit controls and reports whether IX or IX' is the
currently active register. IX is selected when this bit is
cleared, and IX' is selected when this bit is set. Reset
clears this bit, selecting IX.
5-4
YSR
IYBANK
28 27 26 25
DSR
MAINBANK
12 11 10 9
Figure 5-2. Select Register
compatibility. Access to this register is done by using the
newly added LDCTL instruction. Also, some of the instruc-
tions like EXX, IM p, and DI/EI change the bit(s). The SR
was shown in Figure 5-2.
IYP Reserved (0)
24 23 22 21
ALT XM LW IEF1
8 7 6 5
5.3.5. Main Bank Select (MAINBANK)
This 2-bit field selects the register set to be used for the A,
F, BC, DE, HL, A', F', BC', DE', and HL' registers. This field
can be set independently of the register set selection for
the other Z380 CPU registers. Reset selects Bank 0 for
these registers.
5.3.6. BC/DE/HL or BC'/DE'/HL' Register
Select (ALT)
This bit controls and reports whether BC/DE/HL or BC'/DE'/
HL' is the currently active bank of registers. BC/DE/HL is
selected when this bit is cleared, and BC'/DE'/HL' is
selected when this bit is set. Reset clears this bit, selecting
BC/DE/HL.
5.3.7. Extended Mode (XM)
This bit controls the Extended/Native mode selection for
the Z380 CPU. This bit is set by the SETC XM instruction.
This bit can not be reset by software, only by Reset. When
this bit is set, the Z380 CPU is in Extended mode. Reset
clears this bit, and the Z380 CPU is in Native mode.
U
SER
XSR
IXBANK
20 19 18 17
IM 0 LCK
4 3 2 1
DC-8297-03
Z380 ™
' M
S ANUAL
IXP
16
AFP
0