Kyocera FS-C8500DN Service Manual page 85

Maintenance
item No.
Checking/clearing the transfer count
U127
Description
Displays the counts of the transfer counter.
Purpose
To check the count after replacement of the transfer belt unit or transfer roller. Also to clear the counts after
replacing transfer roller.
Method
1. Press the OK key. The current counts of the transfer counter is displayed.
Display
Mid Trans.
2nd Trans.
Clearing: [2nd Trans.]
1. Select [Clear].
2. Press the OK key. Transfer roller counter value is cleared.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Setting transfer high-voltage timing
U128
Description
Adjusts the ON/OFF timing of transfer high-voltage output.
Purpose
Basically, the setting need not be changed. If any problem such as faulty images or dirt on the back surface
occurs, change the setting.
Setting
1. Press the OK key.
2. Select the item to set.
3. Change the value using the Left/Right Select keys.
Display
On Timing1
On Timing2
Off Timing
4. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Transfer belt unit counter value
Transfer roller counter value
Description
Transfer ON timing adjustment value (first side)
Transfer ON timing adjustment value (second side)
Transfer OFF timing adjustment value
Setting Initial
range setting
-200 to 200 -54
-200 to 200 -54
-200 to 200 10
2KA
1-3-49