Kyocera FS-C8500DN Service Manual page 107

Maintenance
item No.
Setting: [Punch Regist]
U246
1. Change the setting value using the cursor up/down keys.
Description
Adjustment of registration stop timing
If skewed paper conveying occurs (sample 1), increase the preset value. If the copy paper is Z-folded
(sample 2), decrease the preset value.
2. Press the OK key. The value is set.
Setting: [Punch Pos.]
1. Change the setting value using the Left/Right Select keys.
Description
Adjustment of the paper stop timing
If the distance of the position of a punch hole is smaller than the specified value A, increase the preset
value. If the distance is larger than the value A, decrease the preset value.
2. Press the OK key. The value is set.
Setting: [Width F HP/Width R HP]
1. Change the setting value using the Left/Right Select keys.
Description
Adjustment of front side registration home position
Adjustment of rear side registration home position
2. Press the OK key. The value is set.
Description
Sample 1
Figure 1-3-7
A
Figure 1-3-8
Setting Initial
range setting
-20 to 20 0
Sample 2
Setting Initial
range setting
-10 to 10 0
Preset value A: 5.5 + - 2 mm (inch)
9.5 + - 2 mm (metric)
Setting Initial
range setting
-10 to 10 0
-10 to 10 0
2KA
Change in
value per step
1 ms
Change in
value per step
0.49 mm
Change in
value per step
0.31 mm
0.31 mm
1-3-71