Contents Of Maintenance Mode Items 1 - Kyocera FS-C8500DN Service Manual

(3) Contents of maintenance mode items
Maintenance
item No.
Outputting an own-status report
U000
Description
Outputs lists of the current settings of the maintenance items, and paper jam and service call occurrences.
Outputs the event log or service status page. Also sends output data to the USB memory.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initial-
izing or replacing the backup RAM, output a list of the current settings of the maintenance items to reenter the
settings after initialization or replacement.
Method
1. Press the OK key.
2. Select the item to be output.
Display
Maintenance
User Status
Svc Status
Event
NW Status
All
3. Press the OK key. The interrupt print mode is entered and a list is output.
When A4/Letter paper is available, a report of this size is output. If not, specify the paper feed location.
Method: Send to the USB memory
1. Turn the main power switch off.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the OK key.
6. Select the item to be send.
7. Press the OK key.
8. Select [Text] or [Html].
Display
Print
USB(Text)
USB(Html)
9. Press the OK key.
Output will be sent to the USB memory.
Description
Output list
List of the current settings of the maintenance modes
Outputs the user status page
Outputs the service status page
Outputs the event log
Outputs the network status page
Outputs the all reports
Output list
Outputs the report
Sends output data to the USB memory (text type)
Sends output data to the USB memory (HTML type)
2KA
1-3-7