Kyocera FS-C8500DN Service Manual page 226

2KA
5. Remove the stop ring from the forwarding
pulley retainer.
6. Remove the forwarding pulley from the for-
warding shaft.
Removing the paper feed pulley
7. Remove two stop rings from the primary
paper feed unit.
8. Pull the paper feed shaft in the direction of
the arrow and remove the paper feed pulley.
Removing the separation pulley
9. Remove the stop ring from the primary
paper feed unit.
10. Pull the separation shaft in the direction of
the arrow and remove the separation pulley.
1-5-4
Forwarding shaft
Forwarding pulley
Figure 1-5-5
Stop ring
Paper feed shaft
Paper feed pulley
Figure 1-5-6
Separation shaft
Stop ring
Figure 1-5-7
Forwarding pulley retainer
Stop ring
Stop ring
Separation pulley