Kyocera FS-C8500DN Service Manual page 131

Maintenance
item No.
Setting color/black and white operation mode
U486
Description
When color and B/W are mixed, sets operation mode after a color is detected.
Purpose
To ensure productivity when printing color and B/W in ACS mode, select MODE3. However, selecting MODE3
will increase the maintenance count for cyan, magenta, and yellow color developing units even when there is
a B/W after a color.
Setting
1. Press the OK key.
2. Select the mode.
Display
Mode1
Mode2
Mode3
Auto
Initial setting: Mode2
3. Press the OK key. The setting is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Checking copy counts by paper feed locations
U901
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts.
Method
1. Press the OK key. The counts by paper feed locations are displayed.
Display
MP Tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Duplex
LCF
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the counts to be cleared.
Cassette 3, Cassette 4 and LCF cannot be cleared.
2. Enter 0 using the Right Select key.
3. Press the OK key. The counts is cleared.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Description
Line speed: Color and B/W line speed is switched
Controlling developing motor MCY: Color and B/W mode is switched
Line speed: Fixed at color line speed
Controlling developing motor MCY: Color and B/W mode is switched
Line speed: Fixed at color line speed on and after a color
Controlling developing motor MCY: Fixed at color mode on and after a color
Automatic selection of MODE1 to 3 depending on the using pattern
Description
MP tray
Cassette 1
Cassette 2
Cassette 3 (optional paper feeder)
Cassette 4 (optional paper feeder)
Duplex unit
Optional 3000-sheet paper feeder
Description
2KA
1-3-95