Kyocera FS-C8500DN Service Manual page 127

Maintenance
item No.
Setting the color registration adjustment
U467
Description
Sets the color registration adjustment and transfer belt speed correction. Also, determines the conditions by
which color registration correction is executed depending on the LSU temperature.
Purpose
If color variance is uneven due to a sensor failure, etc., turn this off and temporarily make a manual adjust-
ment.
Method
1. Press the OK key.
2. Select the item to be set.
3. Press the OK key.
Display
Color Reg Adj
T.B. Speed Adj
Set Timing
Setting: [Color Reg Adj]
1. Select On or Off.
Display
Off
On
Initial setting: On
2. Press the OK key. The setting is set.
Setting: [T.B. Speed Adj]
1. Select On or Off.
Display
Off
On
Initial setting: On
2. Press the OK key. The setting is set.
Setting: [Set Timing]
1. Change the setting value using the Left/Right Select keys.
Display
Timing
2. Press the OK key. The value is set.
Completion
Press the Back key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Setting the color registration correction operation
Setting the transfer belt speed correction operation
After the previous correction is executed, color registration is com-
pensated as the LSU temperature varies by the value determined.
Description
Disables the color registration correction operation
Enables the color registration correction operation
Description
Disables the transfer belt speed correction operation
Enables the transfer belt speed correction operation
Description
Conditions for execution depending on the
LSU temperature variation
Setting range Initial setting
2 to 10 10
2KA
1-3-91