Kyocera FS-C8500DN Service Manual page 242

2KA
If manual color registration has failed:
16. If the balance between V-1 and V-5 is more than 2 scales (sample 1) or less than -2
scales (sample 2), perform the following steps:
Sample 1
V-1 V-2
17. Open the front cover. Push the release button and pull out the waste toner tray.
18. Release two hooks and then remove the waste toner tray.
19. Rotate the adjustment knob using a 5 mm hex wrench.
Direction of rotation
(V-1 - V-5) >= 2 scales (sample 1): rotate counterclockwise.
(V-1 - V-5) <= -2 scales (sample 2): rotate clockwise.
Number of rotation
(V-1- V-5) x 4 clicks
20. Refit the toner container and close the front cover.
21. Turn the main power switch off and on. Correction automatically starts.
22. Print a reference chart and verify the result.
1-5-20
V-3 V-4 V-5
Figure 1-5-34
Hook
Figure 1-5-35
Sample 2
V-1 V-2 V-3 V-4 V-5
Hook