Kyocera FS-C8500DN Service Manual page 108

2KA
Maintenance
item No.
Setting: [Staple FR HP]
U246
1. Change the setting value using the Left/Right Select keys.
Description
Adjustment of front and back stapling home position -10 to 10
When staple positions are off toward the front side of the machine (sample 1), increase the preset value.
When staple positions are off toward the rear side of the machine (sample 2), decrease the preset value.
2. Press the OK key. The value is set.
Setting: [Staple SL HP]
1. Change the setting value using the Left/Right Select keys.
Description
Adjustment of slanted stapling home position
To increase the angle for slanted stapling (sample 1), decrease the preset value. To decrease the angle
for slanted stapling (sample 2), increase the preset value.
2. Press the OK key. The value is set.
1-3-72
Description
Sample 1
Figure 1-3-9
Sample 1
Figure 1-3-10
Setting Initial
range setting
0
Sample 2
Setting Initial
range setting
-10 to 10 0
Sample 2
Change in
value per step
0.32 mm
Change in
value per step

0.99