Kyocera FS-C8500DN Service Manual page 347

Chart of image adjustment procedures
Adjusting
Item
order
Adjusting the magnification in the
main scanning direction (printing
1 adjustment)
Adjusting the magnification in the
auxiliary scanning direction (print-
2 ing adjustment)
Adjusting the center line of the MP
tray (printing adjustment)
3
Adjusting the center line of the cas-
settes (printing adjustment)
4
Adjusting the leading edge registra-
tion of the MP tray (printing adjust-
5 ment)
Adjusting the leading edge registra-
tion of the cassette (printing adjust-
6 ment)
Image Description
Polygon motor speed adjustment
Transfer motor speed adjustment
Adjusting the LSU print start timing
Adjusting the LSU print start timing
Registration motor turning on timing (sec-
ondary paper feed start timing)
Registration motor turning on timing (sec-
ondary paper feed start timing)
Maintenance mode
Original
Item No. Mode
U053 Polygon U053 test pattern
U053 TC U053 test pattern
U034 MPT U034 test pattern
U034 Cas 1 U034 test pattern
Cas 2
Cas 3
Cas 4
U034 MPT U034 test pattern
U034 Cas U034 test pattern
Page Remarks
P.1-3-31
P.1-3-31
P.1-3-26 To make an adjustment for duplex printing, select
Dup.
P.1-3-26 Cassette 1: select Cas 1
Cassette 2: select Cas 2
Cassette 3: select Cas 3
Cassette 4: select Cas 4
P.1-3-24 To make an adjustment for duplex printing, select
Dup.
P.1-3-24
2KA-2
2-4-7