Sharp MX-M365N User Manual page 1345

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
THE FINISHER/SADDLE FINISHER DOES NOT
OPERATE
Does a message appear indicating that you need to rem
ove paper from the stapler compiler?
Does the following message appear in the touch panel?
"The finisher is in trouble. xx-xx*" *Letters and number
s appear in xx-xx.
Have functions been disabled by the administrator?
1345 of 1441
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
Solution
Remove all remaining paper from the
stapler compiler.
Check the cable connection of the fi
nisher.
Remove and then firmly reinsert the cabl
e, and restart the machine.
Check with your administrator.
Some functions may have been disabled i
n the setting mode.
3/17/2016 7:14 AM