Sharp MX-M365N User Manual page 1191

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Allows the POP over SSL communication or the POP over TLS communication by STLS
command. This requires the server to support the POP over SSL communication or the
STLS command.
To allow the POP over SSL communication, set the "Port Number" to the POP over SSL
communication port number.
To allow POP over TLS communication, set the "Port Number" to the same port number
as for the normal POP3 communication.
Connection Test
Tap the [Execute] button to test the connection to the POP3 server.
Default Settings
I-Fax Own Name and Address Set
Set these options to store the sender name and source address to be used for Internet
fax communication. The stored sender name and source address will be printed at the top
of the received fax.
Sender Name
Enter the default sender name.
I-Fax Own Address
Enter the default source address.
Direct SMTP Settings
Port Number (Receive)
Enter the receive port number for direct SMTP communication. The default setting is port
25.
Timeout
Enter a timeout.
Port Number (Send)
Enter the transmit port number for direct SMTP communication. The default setting is port
1191 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM