Sharp MX-M365N User Manual page 1228

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
CHANGE PASSWORD
The administrator password can be changed.
When changing the password, be sure to remember the new password.
(It is recommended that you periodically change the administrator password.)
Enter a password consisting of 5 to 32 characters, and tap the [Store] key.
Your setting is made valid only when the machine is turned On again.
The user-level authentication password is required to add, edit or delete the
destination. When you log on, enter "users" as the user name. Then, enter the user
password that you have registered with this option.
The administrator-level authentication password is required to select all settings and
the same functions as those available with the user-level password. When you log on,
enter "admin" as the user name. Then, enter the administrator password that you
have registered with this option.
If you tap the [Store] key without entering a password, the previously set value is
assumed. Password protection is enabled by default.
1228 of 1441
For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE
MACHINE" in the Quick Start Guide.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM