Sharp MX-M365N User Manual page 1285

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
THE TRANSMITTED FAX IS REDUCED BY THE
RECEIVING FAX MACHINE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Point to check
Has the rotation s
ending been set?
1285 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Enable "Rotation Sending Setting" before transmission.
When [Rotation Sending Setting] is not enabled (the image is not rotated), an ori
ginal placed in the vertical orientation may be reduced by the receiving machine.
"Setting mode" → [System Settings] → [Image Send Settings] → [Fax Setting
s] → [Send Settings] → [Rotation Sending Setting]
If "Mixed Size Original" is enabled in Others and an original with a different width
is sent, rotate transmission will be disabled.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Solution
3/17/2016 7:14 AM