Sharp MX-M365N User Manual page 1109

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
OPERATION SETTINGS
Settings related to the image send function (E-mail, Internet fax, etc.) can be configured.
The operation settings below apply to all image send functions.
Default Settings
Hold settings for a while after scanning has been completed.
Use this setting to hold the settings after scanning is completed (until Auto Clear Mode
activates).
Job Auto Start Time During Scanning
Set the time until timeout occurs after the original is scanned. Set from 10 to 240 seconds
in increments of 10 seconds.
Default Display Settings
Select any of the following 5 base screens that appear when you tap the [Image Send] key
or when you tap the ([CA] key) on the Image Send Mode screen.
E-mail
Network Folder
FTP/Desktop
Internet Fax
Fax
Data Entry
Apply Addresses of Sending Modes Only
When an address is selected from the address book, only the addresses displayed in
narrowing mode are applied.
Higher priority is given to the display of address book
If image send mode is enabled, the Address Book is displayed in place of the initial screen
of this mode.
1109 of 1441
For an explanation of settings related to the fax function, see
FAX FUNCTIONS."
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"IMAGE SEND SETTINGS -
3/17/2016 7:14 AM